粤ICP备12010857号-3  LAMPLIC TECHNOLOGY

 

UV application

FLOOR COATING

2018/12/11
Page view:
Shenzhen Blue Spectrum Rick Technology Co., Ltd. has comprehensively solved the problem of slow solidification of the floor. With a large number of R&D teams, elaborate design of customized products, coating and curing has been achieved in various fields. Ultraviolet UV LED curing technology is used to make the floor curing faster, more convenient, more environmentally friendly and efficient.
 
 
Slow curing means that the curing reaction of epoxy resin materials becomes slower at extremely low temperature (10 degree C). It is absolutely forbidden to construct at 5 degree C. This phenomenon has a great relationship with the viscosity. The lower the temperature, the higher the viscosity will be, and it will be more difficult to construct. The curing time is too long, which will cause the coating to be contaminated with dirt, sand and other stolen goods, and even slow down the construction period. Another point is that adding solvents on the construction site will also cause the solidification to be too slow, because the volatilization of solvents will take away part of the heat and cool the film.
 
 
So far, Lan Pei Rick Technology Co., Ltd. has spent a lot of manpower and material resources to develop a new solidified horizon car, which is more efficient for the solidification of the floor and saves a lot of time, manpower and material resources for the solidification of the floor.
Previous article:
Next article: