粤ICP备12010857号-3  LAMPLIC TECHNOLOGY

 

UV material

ACPSA anisotropic conductive voltage sensitive adhesive

2018/09/30
Page view:
Pressure-sensitive adhesives for short. It is a kind of pressure sensitive adhesives. It is mainly used to prepare pressure sensitive adhesive tape. The adhesive force of pressure-sensitive adhesive (the peeling force between the adhesive tape and the bonded surface after pressure bonding) must be greater than the adhesive force (the so-called tactile force shown when the finger touches the adhesive tape lightly). According to its main components, it can be divided into rubber type and resin type. In addition to the main ingredients, other auxiliary ingredients, such as tackifier, plasticizer, filler, viscosity modifier, vulcanizing agent, antioxidant, solvent and so on, should be added.
 
 
Blue spectrum Rick innovatively developed anisotropic conductive UV pressure sensitive adhesives. Through screen printing process, with the rapid characteristics of UV curing, it can quickly realize elastic anisotropic conductive pressure sensitive adhesives on specific surfaces.
 
 
Anisotropic conductive pressure sensitive adhesives are suitable for rapid repairing, non-thermal curing position of special-shaped components, and have low cycle time.
 
 
Typical applications include printing and medical electronics, RFID, touch screens and electronic circuits. Other applications include conductive connection of strip cables, polymer thick film circuit, electrical connection of surface mounting devices, intelligent label and connector installation.
 
 
Pressure-sensitive adhesives for short. It is a kind of pressure sensitive adhesives. It is mainly used to prepare pressure sensitive adhesive tape. The adhesive force of pressure-sensitive adhesive (the peeling force between the adhesive tape and the bonded surface after pressure bonding) must be greater than the adhesive force (the so-called tactile force shown when the finger touches the adhesive tape lightly). According to its main components, it can be divided into rubber type and resin type. In addition to the main ingredients, other auxiliary ingredients, such as tackifier, plasticizer, filler, viscosity modifier, vulcanizing agent, antioxidant, solvent and so on, should be added.
 

ACPSA 各向异性导电压敏胶

Previous article:
Next article: